What should be paid attention to in the maintenance of the superfine pulverizer?

The maintenance of superfine pulverizer is a very important and frequent work. It shall be closely coordinated with extreme operation and maintenance, and full-time personnel shall be on duty for inspection.

Ultrafine pulverizer is an equipment that uses air separation, heavy pressure grinding and shearing to achieve ultra-fine pulverization of dry materials. Let's take a look at the maintenance of the ultramicro pulverizer:

1. The bearing bears all the loads of the negative film machine, so good lubrication is closely related to the life of the bearing. It directly affects the life and operation rate of the machine. Therefore, the injected lubricating oil must be clean and well sealed. Main oil filling point (1) Rotating bearing (2) Rolling bearing (3) All gears (4) can move the bearing and sliding plane.

2. The newly installed wheels and tires are easy to loosen and must be checked frequently.

3. Pay attention to whether all parts of the machine work normally.

4. Pay attention to check the wear degree of easily worn parts and replace them at any time.

5. Dust and other articles shall be placed on the chassis of movable equipment to prevent the movable bearing from moving on the chassis when the machine encounters non fragile materials, which may cause serious accidents.

6. If the temperature of bearing oil rises, stop the machine immediately and check the cause to eliminate it.

7. If there is an impact sound when the rotary gear is running, please stop immediately and check and eliminate it.

Ultrafine pulverizer technology has been developed and widely used in recent decades. At the same time, the industry of ultramicro pulverizer has also been developed rapidly, especially in the pharmaceutical industry, and has been more widely used. The future development prospects are very broad. Ultrafine pulverizer technology is a new technology developed internationally in recent decades. It has been successfully applied in many industries, such as chemical industry, medicine, machinery, etc. In particular, the ultra-fine comminution products produced by vibration method have the advantages of crushing fine particle size, no product difference, completely closed production process, no pollution and no nutrient loss. Understandably, the ultramicro pulverizer has no pollution, low loss and low consumables. All are made of high-quality stainless steel, which can prevent other media from entering. The whole machine has a flat structure, and the materials are fully crushed and collected to reduce losses. The grinding wheel guide rail is made of special super hard stainless steel, which is not easy to wear and has a long service life, thus reducing the use cost.