How to solve the problem that the temperature of the ultra-fine pulverizer becomes higher after bein

Today, a new customer bought a superfine crusher and found that the temperature might gradually increase after using it for a period of time, so he told our superfine crusher manufacturer that he did not know how to control the temperature of the superfine crusher.

Heat generated by factors such as collision and friction between machinery and materials. The manufacturing process of the superfine pulverizer is excellent, and the heat generated by the friction of the machine itself can be ignored; The crushing principle is ingenious. It relies on rolling and grinding rather than hard impact shearing. In addition, the speed of itself is low (only 285r/min), so the heat generated is far lower than that of other crushers. What's more ingenious is that the sorting air flow of the ultramicro crusher directly passes through the crushing tank, which takes away most of the heat at the same time of sorting. Therefore, the ultramicro crusher will not have higher temperature when it runs continuously. In actual measurement, the wall temperature of the ultramicro pulverizer in continuous operation will not exceed 55 ° C, and the powder temperature will not exceed 45 ° C. However, in a narrow and airtight environment, if the air does not circulate, the heat cannot be transmitted, and the limited air is heated again and again, when the indoor air temperature reaches more than 50 degrees, it will lead to the slow heat dissipation of the ultrafine pulverizer, which requires the customer to re place the machine to install ventilation facilities, and this problem can be solved well, Therefore, the importance of ventilation for normal operation must be explained to the customer before installation.