Application characteristics and precautions of Western medicine superfine pulverizer

The ultra-fine pulverizer of Western medicine adopts the design structure of "uniformly dispersing force", so it has no vibration and does not need to be fixed. Four casters are installed on the base, which can be moved arbitrarily and is very convenient to use.

Principle: when materials enter the crushing chamber through the feeding port, they are squeezed, impacted and ground between the throwing hammer and the grinding tile. As the movement of the throwing hammer also causes Pneumatic movement, the air drives the crushed materials to enter the filter bag through the screen for filtration, the air is discharged, and the materials and dust are collected to complete crushing.

Through the above principles, the ultra-fine pulverizer can complete the crushing of Chinese and Western medicine. In order to deepen everyone's views on the pulverizer, the following Xiaobian makes a simple summary on its use characteristics and precautions, hoping to help you!

Application characteristics of Western medicine superfine pulverizer:

1. Suitable for any fibrous, high toughness, high hardness or certain moisture content materials; For pollen or other spore plants, the wall breaking rate of materials required to break the cell wall can reach 95%.

2. High fineness and strong adaptability to materials. Due to the unique grinding method adopted by the ultra-fine crusher, especially the fibrous and high toughness materials that are difficult to crush can obtain good crushing effect.

3. The ultra-fine pulverizer can add water, alcohol or other liquids for wet pulverization, or introduce gas for protective pulverization.

4. No dust, low loss and easy to clean. According to the full performance, the ultra-fine pulverizer adopts a fully enclosed design structure without dead corners, and is equipped with fuse overload and misoperation protection devices to ensure the realization of the above performance.

Precautions for western medicine superfine pulverizer:

1. The operator shall stand at the side of the feeding mouth, and shall not stretch his hand into the feeding mouth. The machine cover shall not be opened during operation and before the machine stops stably.

2. It is forbidden to start with load. When the feeding port is blocked, it is forbidden to feed forcibly by hand or wooden stick. Stop the machine immediately for inspection. When working, feed an appropriate amount of materials evenly. If there are semi wet and dry materials, be sure to dry them in the sun or reduce the feeding amount.