Maintenance of crusher

Crusher refers to the machine that can use external force to deform and split materials into finer particles, which is called crusher. At present, crusher has been widely used in all walks of life. Since pulverizer is the basic processing technology in major production enterprises and applications, ultra-fine pulverization has attracted more and more attention. Although it started late and developed relatively few varieties, it shows its advantages and broad application prospects. Maintenance is very important in use

The following is the maintenance focus of small high-speed crusher.

1. Check whether the bearing is well lubricated

2. Check all fasteners for tightness.

3. Check whether the transmission belt is installed correctly and in good condition. If the belt is damaged, replace it in time. When there is oil stain on the belt or sheave, wipe it with a clean rag in time.

4. Check whether the protective device is in good condition. If the protective device is found to be unsafe, it shall be eliminated in time.

5. Check whether there are materials or other sundries in the damaged cavity, and remove them if necessary.

6. Check whether the head or jackscrew of the hydraulic jack is returned, and whether the adjusting gasket is correctly installed and compressed.