Daily operation procedures for air pulverizer

As for the operation rules of the air grinder, the following small editor will spend some time and energy to elaborate this knowledge, so that everyone can know how to correctly operate this kind of machine and equipment.

The operating procedures of pneumatic pulverizer include:

1. There should be no sundries or foreign matters in the pneumatic pulverizer, because it will damage the performance of the equipment.

2. Before starting the equipment, check the lubrication of its bearing and reducer to see if the lubrication is good and if there is any problem to be solved.

3. Check the amount of oil in the gearbox, whether the oil is sufficient, and whether the oil supply of each bearing oil filling device is normal.

4. Whether the screws and other fasteners are tight, whether the blades are seriously worn, and whether they need to be replaced.

5. Whether the electrical switches and limit switches are in good condition, whether they can work normally, whether the protective covers at the coupling, belt and gear are in good condition and reliable, and whether the electrical facilities are sensitive and reliable.

6. When the pneumatic pulverizer is working, the operator can not leave without permission, let alone the rotating part of the contactor, or move the protective cover at will, which is very dangerous.

7. When the pulverizer is in use, it is necessary to pay attention to whether there is any abnormal phenomenon at any time. In case of failure, the power supply of the equipment should be cut off immediately, and then it should be handled by professional maintenance personnel. It is not allowed to handle without authorization, so as to avoid damaging the equipment.

As long as we master the above seven points, the air grinder will be able to serve us normally, and its life will be longer and longer.