Analysis of the strong vibration fault of the ultra fine powder machine for Chinese medicinal materi

The traditional Chinese medicine superfine powder machine is composed of a stainless steel upper cover and a lower body crushing chamber, which is closed by screw. Through the high-speed operation of the vertical motor, the transverse mounted crushing blade is driven to impact and shear the material. Because the smashed objects are stirred in the closed space, the smashing effect is relatively uniform, the ground area is small, the packaging is convenient, the operation is simple, the structure is exquisite, the volume is small, the weight is light, the efficiency is high, the cleaning is sanitary, the appearance is beautiful, the electricity is saved, the safety is small, the noise is small, and there is no dust pollution.

Analysis of strong vibration fault of ultra fine powder machine for traditional Chinese Medicine

1. There is a mistake in the installation of hammer during maintenance or assembly. If not all hammers change face and turn around uniformly when hammers are used, it will make the traditional Chinese medicine grinder produce violent vibration in operation.

2. The weight difference between the two groups of Chinese herbal medicine superfine powder machine hammers was more than 5g. The way to solve this problem is to adjust the weight of the hammers so that the difference between the two groups of hammers is less than 5g.

3. The hammer of some Chinese herbal medicine superfine powder machine is too tight, and the operation is not flexible. You can turn the hammer by hand after stopping the machine to check, and try to make the hammer more flexible.

4. The weight imbalance of other parts on the rotor may also cause severe vibration of the traditional Chinese medicine grinder. The solution is to carefully check and adjust.

5. The way to solve this problem is to straighten or replace the spindle to eliminate the problem.

6. Some bearings are damaged, bearing clearance is too large, generally this problem needs to be replaced with a new bearing.

7. It is also possible that the fixed nut at the bottom corner of the Chinese herbal medicine superfine powder machine is not fixed tightly or the nut is loose in operation. The solution to this problem is to find and tighten the nut in time.