Working principle and characteristics of traditional Chinese medicine micro pulverizer

The traditional Chinese medicine micro pulverizer is composed of three parts: the main machine, the auxiliary machine and the electric control box. It has the characteristics of air separation, no screen, no net, uniform particle size and so on. The production process is continuous. The machine has reached the international advanced level, and is widely used in pharmaceutical, chemical, food and other industries.

A special labyrinth seal is installed in the bearing part of the traditional Chinese medicine micro pulverizer, which can effectively prevent the dust from entering the bearing cavity, thus prolonging the service life of the bearing. There are two O-shaped rubber sealing rings in the door, so there is no dust leakage to pollute the operating environment.

Working principle of traditional Chinese medicine micro pulverizer:

The material enters the crushing chamber through the hopper through the screw conveyor, and is crushed by the high-speed rotating blade shear. The material is transported into the cyclone separator through the method of negative pressure air transportation, and the bag filter and discharged material meet the requirements of the product.

Through the high-speed relative motion between the movable disc and the fixed disc, the material to be crushed can be crushed through the comprehensive action of the impact, shear, friction between the movable disc and the fixed disc and the impact between the materials.

The traditional Chinese medicine micro pulverizer has the following characteristics

1. The motion system of the machine is one-way high-speed continuous rotation, from the motor → belt drive → moving disc for high-speed rotation, using a single belt rotation, high-speed rotation with stable transmission.

2. The front cover of the machine must be opened after the machine is shut down to fit the inner cavity of the cleaning machine to ensure the cleanliness of the working face of the machine.

3. The crushed material can be directly discharged from the abdomen of the machine.

4. The size of comminution degree can be achieved by sieves with different apertures.