Operation of pneumatic pulverizer requires skill and experience

Airflow mill has been widely used in various fields, because of its advantages, it is loved by many users. When the material enters the crushing chamber according to the adder, it will be crushed into very fine powder by the cutting effect of air flow, strong impact force and friction force.

In the process of work, we still have a lot to pay attention to, we need to regularly check the air grinder bearing temperature rise, when the bearing temperature rises to 50 degrees, to stop checking the fault, timely repair the fault; When the pneumatic pulverizer is running, the drive belt is easy to lengthen, so the belt tightness should be adjusted to ensure the service life of the belt; Vulnerable parts should be inspected regularly and replaced in time to ensure production quality and efficiency.

In the whole process of application, there should be staff to look after, the actual operation of the staff should have a certain technical strength. Before installation, technical training should be given to the actual operators to make them master the basic principles of the equipment and understand the operation procedures.

After a period of application, maintenance should be carried out. In addition, spare parts such as grinding roller, grinding ring and gray knife should be repaired, disassembled and replaced. Before and after using the roller grinding equipment, carefully check whether the connecting bolts and nuts are loose and whether the grease is sufficient.

The above is a small series to give you a brief introduction of the operation of the air grinder technology and experience, I hope you can have a further understanding after reading.