Overall introduction of traditional Chinese medicine superfine pulverizer

Matters needing attention in the use of TCM superfine pulverizer: when crushing, do not mix materials with high hardness and particle size greater than 6 mm. Materials with high moisture content should be dried or freeze-dried to reduce the moisture content to 6%. Before use, be sure to check the fastening screws of the rotating support, which must be tightened. The material box must be clamped tightly. For the safety of users, the power supply must be grounded. In order to improve the crushing quality, the loading amount should be strictly controlled at least 1 / 2 of the box volume. During operation, it can not be used continuously for a long time under normal temperature, and the startup time shall not exceed 30 minutes. If the number of processing is large, it should be used at intervals to prevent bearing overheating and damage to the motor. If continuous production is needed, special refrigeration equipment is needed.

Traditional Chinese medicine superfine pulverizer features high fineness and high speed. This series of models adopt small high-speed motor, which has strong power to improve the fineness and speed of pulverization. Small size, light weight, compact structure, no vibration, no need to be fixed, so that it can be used in any occasion. It has good safety performance, no dust, small loss and easy cleaning. Because this series of machine is intermittent crushing, its crushing chamber is fully closed stainless steel tank structure, which realizes the above performance. It has a wide range of applications, such as plant fiber, high hardness, high toughness materials, such as traditional Chinese medicine, inorganic materials, minerals, etc. Good control performance, fineness can be adjusted at will, because it can be turned on and off at any time, so the fineness can be controlled by controlling the length of crushing time.

The ultramicro pulverizer and power unit should be installed firmly. If the grinder is fixed for a long time, it should be fixed on the cement foundation. If the grinder is mobile, the unit should be installed on the frame made of angle iron, and the power engine (diesel engine or motor) and the belt pulley groove of the grinder are in the same rotary plane. After the installation of the grinder, check the fastening condition of the fasteners, and tighten them if they are loose. At the same time, check whether the belt tightness is appropriate. Before starting the TCM superfine pulverizer, rotate the rotor by hand to check whether the toothed claw, hammer and rotor are flexible and reliable, whether there is collision in the shell, whether the rotation direction of the rotor is consistent with the direction indicated by the arrow, and whether the lubrication of the power machine and the pulverizer is good.